Mounting Directories of FLOW and HERO

Windows

Under Windows the HOME and WORK directory of FLOW and HERO can be mount as network drive by using

 \\cifs.storage.hpc.uni-oldenburg.de\hpc_<working_group>_home

and

 \\cifs.storage.hpc.uni-oldenburg.de\hpc_<working_group>_work

as address, respectively. The name <working_group> has to be replaced to the users working group name on FLOW and HERE (see table below). After that username and password of FLOW and HERO will be requested to connect this share.

Note:

• The username has to be specified with the domain name, e.g. w2kroot\abcd1234

Linux

Under Linux the HOME and WORK directory of FLOW and HERO can be mount by the command

 sudo mount -t cifs -o workgroup=W2KROOT,username=<user>,file_mode=0600,dir_mode=0700,uid=<linux_username>,gid=<linux_group>  //cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_home <mount_point4home>

and

 sudo mount -t cifs -o workgroup=W2KROOT,username=<user>,file_mode=0600,dir_mode=0700,uid=<linux_username>,gid=<linux_group>  //cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_work <mount_point4work>

where <user> has to be replaced by the username on FLOW and HERO. The name <working_group> has to be replaced to the users working group name on FLOW and HERE (see table below). The place holder <mount_point> has to be replaced by an empty valid directory on your Linux. The variables <linux_username> and <linux_group> has to be replaced to the user and group name under linux if the user and the group ID/name is different to the Windows user and group ID. When executing the command first sudo ask for your password on you local machine. After that moount will ask for your password of FLOW or HERO.

Alternatively one can extent the file /etc/fstab by the lines

 //cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_home  <mount_point4home> cifs workgroup=W2KROOT,username=<user>,file_mode=0600,dir_mode=0700,uid=<linux_username>,gid=<linux_group>,noauto,users
 //cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_work  <mount_point4work> cifs workgroup=W2KROOT,username=<user>,file_mode=0600,dir_mode=0700,uid=<linux_username>,gid=<linux_group>,noauto,users

and then mount the devices by

 mount <mount_point4home>
 mount <mount_point4work>

Here the sudo command is not needed due to the users option.

Note:

• The mount command without the entry in the /etc/fstab needs root permissions. Therefore the sudo command before the mount command.
• On Ubuntu 12.04LTS the package 'smbfs' and 'smbclient' has to be installed by sudo apt-get install smbfs. For other Linux distributions please show in your package manager.
• The file system has to be mounted after each reboot or shutdown. They are not mounted automatically
• sudo caches the password for a certain time. So if you call sudo twice sudo don't ask for the password.

GPFS filesystem of FLOW under Linux

On FLOW there exist a high-performance GPFS filesystem. This is not mountable by CIFS. An alternative way to mount this file system is the usage of sshfs which rely on SFTP-protocol. With the command

 sshfs <user>@flow.hpc.uni-oldenburg.de:/data/work/gpfs/<working_group>/<user> <mount_point4gpfs>

the filesystem can be mounted. The variables <user> and <working_group> have to be replaced by your username and usergroup on FLOW, respectively. The mount point <mount_point4gpfs> must be an existing empty directory on your local file system.

Alternatively one can extent the file /etc/fstab by the lines

 <user>@flow.hpc.uni-oldenburg.de:/data/work/gpfs/<working_group>/<user>   <mount_point4gpfs>  fuse.sshfs noauto,_netdev,users,idmap=user,allow_other,reconnect 0 0

Note:

• On Ubuntu 12.04LTS the package 'sshfs' has to be installed by sudo apt-get install sshfs. For other Linux distributions please show in your package manager.

OSX

Under OSX you can mount your HOME directory following the three-step procedure outlined below (here, tested working on OSX 10.7.5):

1) Open the Finder Window. Proceed to Finder Main Menu -> Go -> Connect to Server (similarly you might type cmd-K in the Finder window) in order to open a dialog box that will enable you to connect to a remote server.

2) Enter the connection details: as Serveraddress fill in

 cifs://cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_home

where you need to replace <workin_group> to fully specify the network path to the directory you want to mount.

3) Once you try to connect to the server you will be prompted for your login details. These refer to your anonymous university username (in the form of aabb1122) and the corresponding password. Further, choose to login as a Registered User. After a successful login procedure, OSX will provide a mount point, appearing as additional icon in the Finder.

Working group names

Follwing working group names are available:

<working_group>	Description
com	???
fk5	Members of Faculty V
fw	Staff of ForWind
hpcguest	Guest accounts
hrz	Staff of the HRZ
iwes	Fraunhofer Institute IWES

If you are a user of the HPC component HERO and if you would like to mount your home directory you need to replace <working_group> by the name of the group you are related to. The subsequent list specifies all available group names:

Available group names for HERO users

agacoustics

agamecon

agancp

aganimalbiodiv

agappanalysis

agbiopsych

agbuseng

agcoastal

agcogpsych

agcompchem

agcompint

agcomplexsys

agcompneuro

agcompphys

agcoordchem

agdistsys

agenvinf

agfieldtheo

aggeneralpsych

aghydrogeo

agmediainf

agmediphys

agmodelling

agmolchem

agnanoopt

agneuropsych

agnumerics

agphysocean

agphysocean

agplantbiodiv

agsigproc

agsofteng

agstatistics

agstatphys

agsystematics

agtheochem

agvlba

agzoophys