View source for Mounting Directories of FLOW and HERO

== Windows ==
Under Windows the HOME and WORK directory of FLOW and HERO can be mount as network drive by using 

  \\cifs.storage.hpc.uni-oldenburg.de\hpc_<working_group>_home

and

  \\cifs.storage.hpc.uni-oldenburg.de\hpc_<working_group>_work

as address, respectively. The name <working_group> has to be replaced to the users working group name on FLOW and HERE ([[#Working group names|see table below]]). After that username and password of FLOW and HERO will be requested to connect this share.

'''Note''': 
* The username has to be specified with the domain name, e.g. ''w2kroot\abcd1234''


== Linux ==
Under Linux the HOME and WORK directory of FLOW and HERO can be mount by the command

  sudo mount -t cifs -o workgroup=W2KROOT,username=<user>,file_mode=0600,dir_mode=0700,uid=<linux_username>,gid=<linux_group>  //cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_home <mount_point4home>

and

  sudo mount -t cifs -o workgroup=W2KROOT,username=<user>,file_mode=0600,dir_mode=0700,uid=<linux_username>,gid=<linux_group>  //cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_work <mount_point4work>

where <user> has to be replaced by the username on FLOW and HERO. The name <working_group> has to be replaced to the users working group name on FLOW and HERE ([[#Working group names|see table below]]). The place holder <mount_point> has to be replaced by an empty valid directory on your Linux. The variables <linux_username> and <linux_group> has to be replaced to the user and group name under linux if the user and the group ID/name is different to the Windows user and group ID. When executing the command first ''sudo'' ask for your password on you local machine. After that moount will ask for your password of FLOW or HERO.

Alternatively one can extent the file ''/etc/fstab'' by the lines

  //cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_home  <mount_point4home> cifs workgroup=W2KROOT,username=<user>,file_mode=0600,dir_mode=0700,uid=<linux_username>,gid=<linux_group>,noauto
  //cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_work  <mount_point4work> cifs workgroup=W2KROOT,username=<user>,file_mode=0600,dir_mode=0700,uid=<linux_username>,gid=<linux_group>,noauto

and then mount the devices by

  sudo mount <mount_point4home>
  sudo mount <mount_point4work>



'''Note''': 
* The ''mount'' command needs root permissions. Therefore the ''sudo'' command before the mount command.
* On Ubuntu 12.04LTS the package 'smbfs' and 'smbclient' has to be installed by ''sudo apt-get install smbfs''. For other Linux distribution please show in you package manager
* The file system has to be mounted after each reboot or shutdown. They are not mounted automatically
* ''sudo'' caches the password for a certain time. So if you call ''sudo'' twice sudo don't ask for the password.

== OSX ==
Under OSX you can mount your HOME directory following the three-step procedure outlined below (here, tested working on OSX 10.7.5):

1) Open the <code>Finder</code> Window. Proceed to <code>Finder Main Menu -> Go
-> Connect to Server</code> (similarly you might type <code>cmd-K</code> in the
<code>Finder</code> window) in order to open a dialog box that will enable you to connect to a
remote server.

2) Enter the connection details: as <code>Serveraddress</code> fill in

  cifs://cifs.storage.hpc.uni-oldenburg.de/hpc_<working_group>_home

where you need to replace <code><workin_group></code> 
to fully specify the network path to the directory you want to mount. 

3) Once you try to connect to the server you will be prompted for your login
details. These refer to your anonymous university username (in the form of
<code>aabb1122</code>) and the corresponding password.  Further, choose to
login as a <code>Registered User</code>.  After a successful login procedure,
OSX will provide a mount point, appearing as additional icon in the
<code>Finder</code>.

== Working group names ==
Follwing working group names are available:
{| style="background-color:#eeeeff;" cellpadding="10" border="1" cellspacing="0" 
|- style="background-color:#ddddff;"
!<working_group>
!Description
|-
|  com
| ???
|-
| fk5 
| Members of Faculty V
|-
| fw
| Staff of ForWind
|-
| hpcguest
| Guest accounts
|-
| hrz
| Staff of the HRZ
|-
| iwes
| Fraunhofer Institute IWES
|-
|}

If you are a user of the HPC component HERO and if you would like to mount your home directory you need to replace <workin_group> by the name of the group you are related to. The subsequent list specifies all available group names:

; Available group names for HERO users:
: agacoustics
: agamecon
: agancp
: aganimalbiodiv
: agappanalysis
: agbiopsych
: agbuseng
: agcoastal
: agcogpsych
: agcompchem
: agcompint
: agcomplexsys
: agcompneuro
: agcompphys
: agcoordchem
: agdistsys
: agenvinf
: agfieldtheo
: aggeneralpsych
: aghydrogeo
: agmediainf
: agmediphys
: agmodelling
: agmolchem
: agnanoopt
: agneuropsych
: agnumerics
: agphysocean
: agphysocean
: agsigproc
: agsofteng
: agstatistics
: agstatphys
: agsystematics
: agtheochem
: agvlba
: agzoophys